How to use the nut string spacing jig
This jig was designed by Edward Dick of the Colorado School of Lutherie. It is now sold by Luthier Suppliers
How to Use the nut string spacing jig
To use it, just mark the 2 outer strings on the nut in the location that is desired. Place the nut on the jig and slide up or down until the outer strings come into contact with the lines. Hold in place and mark the remaining strings by transferring the line locations to the nut. Here is a short introduction video:
How to make a guitar nut
The video below shows how to make a guitar nut using this jig.
This instructional video shows how to make a guitar nut. This instruction is used in the Colorado School of Lutherie, and uses the new jig Nut String Spacing Jig as sold by Luthier Suppliers